LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Intake/Exhaust Valves & Seats >> Standard Procedure >> Standard Procedure - Valve And Valve Seat Refacing >> Notes

Standard Procedure - Valve And Valve Seat Refacing: Notes

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

The intake and exhaust valves have a 44.5 to 45 degree face angle. The valve seats have a 45 to 45.5 degree face angle. The valve face and valve seat angles are shown in Figure.

scientia non olet · About LEMON Manuals