LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Intake/Exhaust Valves & Seats >> Removal

Intake/Exhaust Valves & Seats: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cylinder head(s). (Refer to ENGINE/CYLINDER HEAD - REMOVAL) 
  2. Remove valve spring. (Refer to ENGINE/CYLINDER HEAD/VALVE SPRINGS - REMOVAL) 
  3. Before removing valves, remove any burrs from valve stem lock grooves to prevent damage to the valve guides. 
  4. Remove valve. Identify each valve to ensure installation in original location.
scientia non olet · About LEMON Manuals