LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Intake Manifold >> Removal >> Removal - Intake Manifold Lower

Removal - Intake Manifold Lower

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel system pressure. (Refer to FUEL SYSTEM - EXCEPT COUPE )
  2. Remove upper intake manifold. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) 
  3. Disconnect electrical connectors from the fuel injectors.
  4. Remove fuel supply hose from fuel rail. (Refer to FUEL SYSTEM - EXCEPT COUPE )
  5. Remove screw attaching fuel rail support bracket to the throttle body support bracket.
  6. Remove bolts attaching fuel rail.
  7. Remove fuel rail and injectors as an assembly.
  8. Remove manifold attaching bolts. See Figure.
  9. Remove lower manifold.
  10. Inspect manifold. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSPECTION) 
scientia non olet · About LEMON Manuals