LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (2.7L DOHC Engine (Service Information) - Except Coupe) >> Air Cleaner Housing >> Installation

Air Cleaner Housing: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install air cleaner housing straight down on locating pins.
  2. Install nut on bracket that holds air cleaner housing and tighten.
  3. Install throttle body air inlet hose to throttle body. Tighten hose clamp. See Figure.
  4. Connect fresh air makeup hose. See Figure.
  5. Connect inlet air temperature sensor electrical connector. See Figure.
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals