LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (2.4L DOHC Engine (Service Information) - Except Coupe) >> Timing Belt Cover(S) >> Removal >> Front Cover - Lower

Front Cover - Lower

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable.
  2. Raise vehicle on hoist.
  3. Remove right front wheel and belt splash shield.
  4. Remove accessory drive belts (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - REMOVAL) .
  5. Remove crankshaft damper (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - REMOVAL)  .
  6. Remove AC/Generator belt tensioner.
  7. Lower vehicle.
  8. Disconnect generator connectors.
  9. Remove generator and bracket.
  10. Raise vehicle on hoist.
  11. Remove fasteners attaching lower timing cover. See Fig 1.
  12. Remove lower timing cover.
Fig 1: Front Timing Belt Covers
GC0032131Courtesy of DAIMLERCHRYSLER CORP.
1 - UPPER TIMING BELT COVER FASTENERS
2 - ENGINE SUPPORT BRACKET FASTENERS
3 - LOWER TIMING BELT COVER FASTENERS
scientia non olet · About LEMON Manuals