LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (2.4L DOHC Engine (Service Information) - Except Coupe) >> Timing Belt Cover(S) >> Installation >> Front Cover - Lower

Front Cover - Lower

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install lower timing belt cover and torque fasteners to 6 N.m (50 in. lbs.). See Figure.
  2. Lower vehicle.
  3. Install generator and bracket.
  4. Connect generator connectors.
  5. Raise vehicle.
  6. Install AC/Generator belt tensioner.
  7. Install crankshaft damper (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - INSTALLATION)  .
  8. Install accessory drive belts (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELTS - INSTALLATION) .
  9. Install belt splash shield and right front wheel.
  10. Lower vehicle.
  11. Connect negative battery cable.
scientia non olet · About LEMON Manuals