Left Mount: Removal
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable.
- Remove throttle body air inlet hose and air cleaner housing assembly.
- Remove two nuts securing speed control servo bracket to left shock tower. Reposition servo.
- Support transmission with floor jack and wooden block.
- Remove the three vertical bolts from mount to transmission bracket (A). See Figure.
- Slightly lower transmission with floor jack.
- Remove mount to frame rail fasteners (B) and remove mount. See Figure.