LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (2.4L DOHC Engine (Service Information) - Except Coupe) >> Front Mount >> Removal

Front Mount: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle.
  2. Remove front mount to bracket horizontal through bolt. See Fig 1.
  3. Remove the AIR pump.
  4. Loosen the rear mount through bolt.
  5. Remove front mount vertical bolts. See Fig 1.
  6. Remove front mount.
Fig 1: FRONT ENGINE MOUNT
GC0032110Courtesy of DAIMLERCHRYSLER CORP.
1 - HORIZONTAL THROUGH BOLT
2 - VERTICAL BOLT(S)
3 - LOWER RADIATOR CROSSMEMBER
4 - FRONT ENGINE MOUNT
scientia non olet · About LEMON Manuals