Engine 2.4L DOHC: Specifications: Torque
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Balance Shaft Carrier to Block-Bolts | 54 | 40 | - |
| Balance Shaft Gear Cover-Double Ended Fastener | 12 | - | 105 |
| Balance Shaft Sprocket-Bolt | 28 | - | 250 |
| Balance Shaft Chain Tensioner-Bolts | 12 | - | 105 |
| Balance Shaft Carrier Cover-Bolts | 12 | - | 105 |
| Camshaft Sprocket-Bolt | 115 | 85 | - |
| Check Valve to Exhaust Manifold | 12 | - | 105 |
| Connecting Rod Cap-Bolts | 27 +1/4 turn | 20 +1/4 turn | - |
| Crankshaft Main Bearing Cap/Bedplate | - | - | - |
| -M8 Bolts | 28 | - | 250 |
| -M11 Bolts | 75 | 55 | - |
| Crankshaft Damper | 136 | 100 | - |
| Cylinder Head-Bolts | (Refer to ENGINE/CYLINDER HEAD - INSTALLATION) | ||
| Cylinder Head Cover-Bolts | 12 | - | 105 |
| Flex Plate to Crankshaft | 95 | 70 | - |
| Engine Mount Bracket Right-Bolts | 61 | 45 | - |
| Engine Mounting-Bolts | (Refer to 9 ENGINE/ENGINE MOUNTING) | ||
| Exhaust Manifold to Cylinder Head-Bolts | 23 | - | 200 |
| Exhaust Manifold Heat Shield-Bolts | 12 | - | 105 |
| Intake Manifold -Bolts | 28 | - | 250 |
| Oil Filter | 11 | 8 | - |
| Oil Pan-Bolts | 12 | - | 105 |
| Oil Pan Drain-Plug | 28 | 20 | - |
| Oil Pump to Block-Bolts | 28 | - | 250 |
| Oil Pump Cover Plate-Bolts | 12 | - | 105 |
| Oil Pump Pick-up Tube-Bolt | 23 | - | 200 |
| Oil Pump Relief Valve-Cap | 41 | 30 | - |
| Spark Plugs | 18 | 13 | - |
| Structural Collar | (Refer to ENGINE/ENGINE BLOCK/STRUCTURAL COLLAR - INSTALLATION) | ||
| Timing Belt Covers | - | - | - |
| - Front Covers to Rear Cover-Screws | 6 | - | 50 |
| - Rear Cover-M6 Bolts | 12 | - | 105 |
| -M8 Bolts | 28 | - | 250 |
| Timing Belt Idler Pulley | 61 | 45 | - |
| Timing Belt Tensioner Lock Bolt | 25 | - | 220 |
| Timing Belt Tensioner Assembly-Bolts | 61 | 45 | - |