LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (2.4L DOHC Engine (Service Information) - Except Coupe) >> Cylinder Head Cover >> Removal

Cylinder Head Cover: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove ignition coil and plug wires. See Fig 1. Remove ground strap.
  2. Remove the cylinder head cover fasteners.
  3. Remove cylinder head cover from cylinder head.
Fig 1: Ignition Coil and Ground Strap
GC0032093Courtesy of DAIMLERCHRYSLER CORP.
1 - IGNITION COIL FASTENERS
2 - GROUND STRAP
scientia non olet · About LEMON Manuals