Section 69 (2.4L DOHC Engine (Service Information) - Except Coupe): Camshaft(S): Description
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
Both camshafts have six bearing journal surfaces and two cam lobes per cylinder. See Fig 1. Flanges at the rear journals control camshaft end play. Provision for a cam position sensor is located on the intake camshaft on the rear of the cylinder head. A hydrodynamic oil seal is used for oil control at the front of the camshaft.
| 1 - CAMSHAFT BEARING CAPS |
| 2 - PLUG |
| 3 - CAMSHAFT |
| 4 - CYLINDER HEAD |
| 5 - CAMSHAFT OIL SEAL |