LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (2.4L DOHC Engine (Service Information) - Except Coupe) >> Air Cleaner Element >> Installation

Air Cleaner Element: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any debris from inside air cleaner housing.
  2. Install air cleaner element onto throttle body air inlet hose.
  3. Install throttle body air inlet hose into air cleaner housing. Push in on hose until an audible "click" is heard from locking tabs.
  4. Install hose on throttle body. Tighten hose clamp.
  5. Connect PCV hose to intake manifold.
  6. Connect fresh air makeup hose.
  7. Connect inlet air temperature sensor electrical connector.
  8. Connect negative battery cable.
scientia non olet · About LEMON Manuals