LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (2.0L DOHC Engine (Service Information) - Except Coupe) >> Oil Pan >> Removal

Oil Pan: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative cable from battery.
  2. Raise vehicle on hoist.
  3. Drain engine oil and remove oil filter.
  4. Remove oil filter adaptor from engine block. See Figure(Refer to ENGINE/LUBRICATION/OIL FILTER ADAPTER - REMOVAL) .
  5. Remove structural collar. See Fig 1.
  6. Remove lateral bending brace.
  7. Remove transaxle dust cover.
  8. Remove oil pan bolts.
  9. Remove oil pan.
Fig 1: Structural Collar - Removal/Installation
GC0021097Courtesy of DAIMLERCHRYSLER CORP.
1 - OIL PAN
2 - STRUCTURAL COLLAR
scientia non olet · About LEMON Manuals