Left Mount: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable.
Remove throttle body air inlet hose and air cleaner housing assembly.
Remove two nuts securing speed control servo bracket to left shock tower. Reposition servo.
Support transmission with floor jack and wooden block.
Remove the three vertical bolts from mount to transmission bracket (A). See Fig 1.
Slightly lower transmission with floor jack.
Remove mount to frame rail fasteners (B) and remove mount. See Fig 1.

Fig 1: Left Side Mount - Typical

Courtesy of DAIMLERCHRYSLER CORP.

1 - TRANSMISSION SUPPORT ASSEMBLY

2 - LEFT FRAME RAIL

3 - GROUND CABLE

4 - BOLT (D)

5 - TRANSMISSION BRACKET

6 - TRANSMISSION

7 - BOLT (C)

8 - BOLT (B)

9 - BOLT (A)