LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Wiring Diagram Information) >> Wiring Diagram Information >> Standard Procedure >> Testing For Continuity

Testing For Continuity

WARNING: This page is about a different car, the 2005 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuse for the circuit being checked or, disconnect the battery.
  2. Connect one lead of the ohmmeter to one side of the circuit being tested. See Fig 1.
  3. Connect the other lead to the other end of the circuit being tested. Low or no resistance means good continuity.
Fig 1: Testing for Continuity
GC0002524Courtesy of DAIMLERCHRYSLER CORP.
1 - FUSE REMOVED FROM CIRCUIT
scientia non olet · About LEMON Manuals