Section 63 (Wiring Diagram Information): Diode: Removal
WARNING: This page is about a different car, the 2005 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery.
- Locate the diode in the harness, and remove the protective covering.
- Remove the diode from the harness, pay attention to the current flow direction. See Fig 1.
1 - CURRENT FLOW 2 - BAND AROUND DIODE INDICATES CURRENT FLOW 3 - DIODE AS SHOWN IN THE DIAGRAMS