Positive Crankcase Ventilation System Check
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the positive crankcase ventilation (PCV) valve from the rocker cover, then reconnect the PCV valve to the vacuum supply hose.
- With the engine idling, put your finger on the open end of the PCV valve, and check for negative pressure (vacuum).NOTE: At this time, the plunger in the PCV valve should move back and forth as the open end is covered and uncovered.
- If negative pressure is not felt, clean or replace the PCV valve. Inspect the vacuum supply hose and vacuum supply hose port for restriction or plugged condition.