LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Diagnosis - Automatic Transmission - Coupe) >> Transaxle Assembly >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: *: Indicates parts which should be partially tightened, and then fully tightened after placing the vehicle on the ground and loading the full weight of the engine on the vehicle body.
Fig 1: Removing And Installing Transaxle (2.4L Engine) Assembly (1 Of 2)
G04542588Courtesy of CHRYSLER CORP.
CAUTION: *: Indicates parts which should be partially tightened, and then fully tightened after placing the vehicle on the ground and loading the full weight of the engine on the vehicle body.
Fig 2: Removing And Installing Transaxle (2.4L Engine) Assembly (2 Of 2)
G04542589Courtesy of CHRYSLER CORP.

Required Special Tools: 

CAUTION: *: Indicates parts which should be partially tightened, and then fully tightened after placing the vehicle on the ground and loading the full weight of the engine on the vehicle body.
Fig 3: Removing And Installing Transaxle (3.0L Engine) Assembly (1 Of 2)
G04542590Courtesy of CHRYSLER CORP.
CAUTION: *: Indicates parts which should be partially tightened, and then fully tightened after placing the vehicle on the ground and loading the full weight of the engine on the vehicle body.
Fig 4: Removing And Installing Transaxle (3.0L Engine) Assembly (2 Of 2)
G04542591Courtesy of CHRYSLER CORP.

Required Special Tools: 

scientia non olet · About LEMON Manuals