Special Tools
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| TOOL | TOOL NUMBER AND NAME | REPLACED BY MILLER TOOL NUMBER | APPLICATION |
|---|---|---|---|
| MD998330 (Includes MD998331) Oil pressure gauge (3.0 MPa, 427 psi) |
N/A | Measurement of hydraulic pressure | |
| MD998332 Adapter |
MD998332 8620 |
Connection for oil pressure gauge | |
| MD998478 Test harness (3 pin, triangle) |
N/A | Inspection using an oscilloscope | |
| MB991502 Scan tool (MUT-II) |
DRB-III | Checking diagnostic trouble codes | |
| MB991709 Test harness set |
8469 | Inspection using an oscilloscope | |
| MD998900 Adapter |
8620 | Connection for oil pressure gauge | |
| MB995062 Flushing tool |
6906B | Flushing cooler and tube | |
| MB991453 Engine hanger assembly |
C-4852 | When the engine hanger is used: Supporting the engine assembly during removal and installation of the transaxle assembly
NOTE:
Special tool MB991454 is a part of engine hanger attachment set MB991453.
|
|
| GENERAL SERVICE TOOL MZ203827 Engine lifter |
N/A | ||
| MB991454 Engine hanger balancer |
C-4852 | ||
| MB991895 Engine hanger |
N/A | ||
| MB991928 Engine hanger A: MB991929 Joint (50) x2 B: MB991930 Joint (90) x2 C: MB991931 Joint (140) x2 D: MB991932 Foot (standard) x4 E: MB991933 Foot (short) x2 F: MB991934 Chain and hook assembly |
N/A | ||
| MB991897 Ball joint remover |
MB991113, N/A or general service tool | Knuckle and tie rod end ball joint breakaway torque check
NOTE:
Steering linkage puller (MB990635 or MB991113) is also used to disconnect knuckle and tie rod end ball joint.
|