LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Diagnosis - Automatic Transmission - Coupe) >> Automatic Transaxle Diagnosis >> Symptom Procedures >> INSPECTION PROCEDURE 16: Transaxle won't Downshift under Load with Auto-cruise Engaged. >> Circuit Operation

Circuit Operation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

When the battery positive voltage from PCM (terminal number 75) is grounded at auto-cruise control-ECU (terminal number 3), the auto-cruise control-ECU emits an overdrive cancel signal. When a malfunction of the auto-cruise control circuit occurs, the transaxle may downshift harshly with the auto-cruise control engaged.

scientia non olet · About LEMON Manuals