LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Transaxle (Transmission) >> Disassembly And Assembly >> Disassembly Service Points >> < < B >> Transaxle Case Removal

< < B >> Transaxle Case Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove all sixteen bolts securing the transaxle case to the clutch housing.
  2. Use snap ring pliers to expand the indicated snap ring. The snap ring will separate from the ball bearing groove, and the output shaft assembly will fall under its own weight.
    CAUTION: Do not use a scraper or chisel to remove the transaxle case.
  3. Remove the transaxle case from the clutch housing.
    Fig 1: Separating Snap Ring
    G04541574Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals