LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Transaxle (Transmission) >> Disassembly And Assembly >> Assembly Service Points >> >> L << Speedometer Gear Installation

>> L << Speedometer Gear Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply gear oil (Hypoid gear oil SAE 75W-90 or 75W-85W conforming to API classification GL-4) to the O-ring of the speedometer gear.
  2. Tighten the bolt to specified torque.

    Tightening torque: 4 +/- 1 N.m (35 +/- 9 in-lb) 

    Fig 1: Applying Gear Oil To O-Ring Of Speedometer Gear
    G04541604Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals