Snap Rings, Spacers And Thrust Plate For Adjustment
WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
Snap ring
(For adjustment of input shaft front bearing end play) < F5M42 >
SNAP RING SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 2.24 (0.0882) | None | MD706537 | 2.38 (0.0937) | Brown | MD706539 |
| 2.31 (0.0909) | Blue | MD706538 |
Snap ring
(For adjustment of input shaft front bearing end play) < F5M51 >
(For adjustment of input shaft rear bearing end play) < F5M42 >
(For adjustment of output shaft front bearing end play) < F5M42 >
SNAP RING SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 1.43 (0.0563) | Green (2) | MD746708 | 1.59 (0.0626) | Yellow (2) | MD746710 |
| 1.51 (0.0594) | White (2) | MD746709 |
Thrust plate < F5M42 >
(For adjustment of input shaft 5th speed gear end play)
THRUST PLATE < F5M42 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 2.82 (0.1110) | 0 | MD748015 | 2.98 (0.1173) | 6 | MD748019 |
| 2.86 (0.1126) | 2 | MD748016 | 3.02 (0.1189) | 7 | MD748020 |
| 2.90 (0.1142) | 3 | MD748017 | 3.06 (0.1205) | 8 | MD748021 |
| 2.94 (0.1157) | 5 | MD748018 | 3.10 (0.1220) | 9 | MD748022 |
Thrust plate < F5M51 >
(For adjustment of input shaft 5th speed gear end play)
THRUST PLATE < F5M51 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 3.82 (0.1504) | 0 | MD748465 | 3.98 (0.1567) | 6 | MD748469 |
| 3.86 (0.1520) | 2 | MD748466 | 4.02 (0.1583) | 7 | MD748470 |
| 3.90 (0.1535) | 3 | MD748467 | 4.06 (0.1598) | 8 | MD748471 |
| 3.94 (0.1551) | 5 | MD748468 | 4.10 (0.1614) | 9 | MD748472 |
Snap ring < F5M51 >
(For adjustment of input shaft rear bearing end play)
SNAP RING < F5M51 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 1.44 (0.0567) | None | MD746602 | 1.58 (0.0622) | Brown | MD746604 |
| 1.51 (0.0594) | Blue | MD746603 |
Snap ring < F5M42 >
(For adjustment of output shaft 3rd speed gear end play)
SNAP RING < F5M42 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 2.81 (0.1106) | Green | MD745799 | 2.97 (0.1169) | Orange | MD745803 |
| 2.85 (0.1122) | White | MD745800 | 3.01 (0.1185) | Red | MD745804 |
| 2.89 (0.1138) | Yellow | MD745801 | 3.05 (0.1201) | Pink | MD745805 |
| 2.93 (0.1154) | Black | MD745802 | 3.09 (0.1217) | Blue | MD745806 |
Snap ring < F5M51 >
(For adjustment of output shaft 3rd speed gear end play)
SNAP RING < F5M51 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 2.81 (0.1106) | None | MD746594 | 2.97 (0.1169) | Green | MD746598 |
| 2.85 (0.1122) | Blue | MD746595 | 2.97 (0.1169) | Black | MD746599 |
| 2.89 (0.1138) | Brown | MD746596 | 3.05 (0.1201) | White | MD746600 |
| 2.93 (0.1154) | Yellow | MD746597 | 3.09 (0.1217) | Orange | MD746601 |
Snap ring < F5M42 >
(For adjustment of output shaft rear bearing end play)
SNAP RING < F5M42 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 2.31 (0.0909) | Black (2) | MD747149 | 2.55 (0.1004) | Yellow | MD746566 |
| 2.35 (0.0925) | None | MD746561 | 2.59 (0.1020) | Black | MD746567 |
| 2.39 (0.0941) | Blue | MD746562 | 2.63 (0.1035) | Orange | MD746568 |
| 2.43 (0.0957) | Brown | MD746563 | 2.67 (0.1051) | Blue | MD746569 |
| 2.47 (0.0972) | Green | MD746564 | 2.71 (0.1067) | Brown | MD746570 |
| 2.51 (0.0988) | White | MD746565 |
Snap ring < F5M51 >
(For adjustment of output shaft rear bearing end play)
SNAP RING < F5M51 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 1.36 (0.0535) | Yellow | MD748449 | 1.55 (0.0610) | White | MD748452 |
| 1.40 (0.0551) | Green | MD748450 | 1.58 (0.0622) | Brown | MD746604 |
| 1.44 (0.0567) | None | MD746602 | 1.63 (0.0642) | Orange | MD748453 |
| 1.44 (0.0567) | Black | MD748451 | 1.63 (0.0642) | Blue | MD748454 |
| 1.51 (0.0594) | Blue | MD746603 | 1.68 (0.0661) |
Spacer < F5M51 >
(For adjustment of input shaft end play)
SPACER < F5M51 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 1.34 (0.0528) | 34 | MD723600 | 1.61 (0.0634) | 61 | MD723609 |
| 1.43 (0.0563) | 43 | MD723603 | 1.70 (0.0669) | 70 | MD756760 |
| 1.52 (0.0598) | 52 | MD723606 | 1.79 (0.0705) | 79 | MD756763 |
Spacer < F5M51 >
(For adjustment of output shaft preload)
SPACER < F5M51 > SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 0.86 (0.0339) | 86 | MD720938 | 1.19 (0.0469) | L | MD710456 |
| 0.89 (0.0350) | 89 | MD720939 | 1.22 (0.0480) | G | MD700271 |
| 0.92 (0.0362) | 92 | MD720940 | 1.25 (0.0492) | M | MD710457 |
| 0.95 (0.0374) | 95 | MD720941 | 1.28 (0.0504) | N | MD710458 |
| 0.98 (0.0386) | 98 | MD720942 | 1.31 (0.0516) | E | MD706574 |
| 1.01 (0.0398) | 01 | MD720943 | 1.34 (0.0528) | O | MD710459 |
| 1.04 (0.0409) | 04 | MD720944 | 1.37 (0.0539) | P | MD710460 |
| 1.07 (0.0421) | 07 | MD720945 | 1.40 (0.0551) | None | MD706573 |
| 1.10 (0.0433) | J | MD710454 | 1.43 (0.0563) | Q | MD710461 |
| 1.13 (0.0445) | D | MD700270 | 1.46 (0.0575) | R | MD710462 |
| 1.16 (0.0457) | K | MD710455 |
Spacer
(For adjustment of differential case preload)
SPACER SNAP RING SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 0.71 (0.0279) | 71 | MD754475 | 1.01 (0.0398) | 01 | MD720943 |
| 0.74 (0.0292) | 74 | MD727660 | 1.04 (0.0409) | 04 | MD720944 |
| 0.77 (0.0303) | 77 | MD754476 | 1.07 (0.0421) | 07 | MD720945 |
| 0.80 (0.0315) | 80 | MD727661 | 1.10 (0.0433) | J | MD710454 |
| 0.83 (0.0327) | 83 | MD720937 | 1.13 (0.0445) | D | MD700270 |
| 0.86 (0.0339) | 86 | MD720938 | 1.16 (0.0457) | K | MD710455 |
| 0.89 (0.0350) | 89 | MD720939 | 1.19 (0.0469) | L | MD710456 |
| 0.92 (0.0362) | 92 | MD720940 | 1.22 (0.0480) | G | MD700271 |
| 0.95 (0.0374) | 95 | MD720941 | 1.25 (0.0492) | M | MD710457 |
| 0.98 (0.0386) | 98 | MD720942 |
Spacer
(For adjustment of differential case backlash)
SPACER SNAP RING SPECIFICATIONS CHART
| THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. | THICKNESS mm (in) | IDENTIFICATION SYMBOL | PART NO. |
|---|---|---|---|---|---|
| 0.72 - 0.79 (0.0283 - 0.0311) | - | MA180862 | 0.98 - 1.02 (0.0386 - 0.0402) | - | MR593560 |
| 0.80 -0.84 (0.0315 - 0.0331) | - | MR593562 | 1.02 - 1.06 (0.0402 - 0.0417) | - | MA180875 |
| 0.85 - 0.90 (0.0335 - 0.0354) | - | MA180861 | 1.07 - 1.11 (0.0421 - 0.0437) | - | MR593559 |
| 0.90 - 0.94 (0.0354 - 0.0370) | - | MR593561 | 1.12 - 1.16 (0.0441 - 0.0457) | - | MA180876 |
| 0.94 - 0.98 (0.0370 - 0.0386) | - | MA180860 | 1.16 - 1.20 (0.0457 - 0.0472) | - | MR581571 |