LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Inspection >> Speed Gears

Speed Gears

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the helical and clutch gear tooth surfaces are not damaged or worn.
  2. Check that the synchronizer cone surfaces are not roughened, damaged or worn.
  3. Check that the gear inside diameter and front and rear surfaces are not damaged and worn.
    Fig 1: Checking Helical And Clutch Gear Tooth Surfaces
    G04541690Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals