LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < I >> Taper Roller Bearing Removal

< < I >> Taper Roller Bearing Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the taper roller bearing, and then set them on the press.
  2. Push down on the output shaft with the press and remove the taper roller bearing.
    Fig 1: Removing Taper Roller Bearing
    G04541649Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals