LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < H >> Roller Bearing Inner Race Removal

< < H >> Roller Bearing Inner Race Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998917, support the roller bearing inner race, and then set them on the press.
  2. Push down on the output shaft with the press and remove the roller bearing inner race.
    Fig 1: Removing Roller Bearing Inner Race
    G04541648Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals