LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < G >> 1ST Speed Gear Sleeve Removal

< < G >> 1ST Speed Gear Sleeve Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the 1st speed gear sleeve, and then set them on the press.
  2. Push down on the output shaft with the press and remove the 1st speed gear sleeve.
    Fig 1: Removing 1st Speed Gear Sleeve (F5M42)
    G04541646Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Removing 1st Speed Gear Sleeve (F5M51)
    G04541647Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals