LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < E >> 3RD Speed Gear Removal

< < E >> 3RD Speed Gear Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998917, support the 2nd speed gear, and then set them on the press.
  2. Push down on the output shaft with the press and remove the 3rd speed gear.
    Fig 1: Removing 3rd Speed Gear
    G04541644Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals