LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> R << Ball Bearing Installation

>> R << Ball Bearing Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the installation direction of the ball bearing.
  2. Using special tools MD998812 and MD998818, press install the ball bearing.
    Fig 1: Installing Ball Bearing
    G04541679Courtesy of DAIMLERCHRYSLER CORP.