LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> L << 4TH Speed Gear Installation

>> L << 4TH Speed Gear Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the output shaft on the press support stand.
  2. Using special tools MD998812, MD998813, MD998819 < F5M42 >, MD998821 < F5M51 > and MD998364 < F5M51 >, press install the 4th speed gear onto the output shaft.
    Fig 1: Installing 4th Speed Gear Onto Output Shaft (F5M42)
    G04541668Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Installing 4th Speed Gear Onto Output Shaft (F5M51)
    G04541669Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals