LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> I << 2ND Speed Gear Sleeve Installation

>> I << 2ND Speed Gear Sleeve Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the output shaft on the press support stand.
  2. Using special tools MD998812, MD998813, MD998822 < F5M42 >, MD998824 < F5M51 > and MD998364 < F5M51 >, press install the 2nd speed sleeve onto the output shaft.
    Fig 1: Installing 2nd Speed Sleeve Onto Output Shaft (F5M42)
    G04541663Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Installing 2nd Speed Sleeve Onto Output Shaft (F5M51)
    G04541664Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals