LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> C << Taper Roller Bearing Installation

>> C << Taper Roller Bearing Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the output shaft gear, and then set them on the press.
  2. Using special tools MD998812 and MD998819, press install the taper roller bearing with the press.
    Fig 1: Installing Taper Roller Bearing With Press
    G04541652Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals