LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> B << Roller Bearing Inner Race Installation

>> B << Roller Bearing Inner Race Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the output shaft gear, and then set them on the press.
  2. Using special tools MD998812 and MD998818, press install the roller bearing inner race with the press.
    Fig 1: Installing Roller Bearing Inner Race With Press
    G04541651Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals