LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Output Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> A << Oil Seal Installation

>> A << Oil Seal Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the oil seal is pressed into the position shown in the illustration.

Fig 1: Installing Oil Seal
G04541650Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals