LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Input Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < D >> 4TH Speed Gear Sleeve Removal

< < D >> 4TH Speed Gear Sleeve Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the 3rd speed gear, and then set them on the press.
  2. Push down on the input shaft with the press and remove the 4th speed gear sleeve.
    Fig 1: Supporting 3rd Speed Gear
    G04541612Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals