LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Input Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < C >> 5TH Speed Gear Removal

< < C >> 5TH Speed Gear Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the 5th speed gear, and then set them on the press.
  2. Push down on the input shaft with the press and take off the 5th speed gear.
    Fig 1: Supporting 5th Speed Gear
    G04541611Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals