LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Input Shaft >> Disassembly And Assembly >> Disassembly Service Points >> < < B >> Thrust Plate Stopper Removal

< < B >> Thrust Plate Stopper Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Using a screwdriver, pry up the position shown in the illustration and remove the thrust plate stopper.

Fig 1: Removing Thrust Plate Stopper
G04541610Courtesy of DAIMLERCHRYSLER CORP.