LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> L << Ball Bearing Installation

>> L << Ball Bearing Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool MD998801, support the 2nd speed gear portion of the input shaft, and then set them on the press.
  2. Using special tools MD998812 and MD998818, press install the ball bearing in the input shaft.
    Fig 1: Installing Ball Bearing In Input Shaft
    G04541629Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals