LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Overhaul - Coupe) >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> K << Thrust Plate Stopper Installation

>> K << Thrust Plate Stopper Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Install the thrust plate stopper by pressing special tools MD998812, MD998813 and MD998824 < F5M42 > or MD998825 < F5M51 > by hand. Make sure that it is not tilted.

Fig 1: Installing Thrust Plate Stopper
G04541628Courtesy of DAIMLERCHRYSLER CORP.