>> B << Bushing Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Press fit the bushing so the seam is away from the air vent.

Fig 1: Identifying Seam Of Bushing And Air Vent (F5M42)
Courtesy of DAIMLERCHRYSLER CORP.

Fig 2: Identifying Seam Of Bushing And Air Vent (F5M51)
Courtesy of DAIMLERCHRYSLER CORP.
Be sure the bushing is fully seated as shown. It must be 1 mm (0.04 inch) below the housing surface.

Fig 3: Identifying Fully Seated Bushing
Courtesy of DAIMLERCHRYSLER CORP.