LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (On-Vehicle Service - Coupe) >> Transaxle Control >> Removal And Installation >> Removal Service Point >> << B >> Gearshift Link Clip Removal

<< B >> Gearshift Link Clip Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

Push up the claws of the gearshift link clip using a screwdriver, etc., and then remove the gearshift link clip from the bracket together with the cables.

Fig 1: Locating Gearshift Link Clip And Claws
G04541516Courtesy of DAIMLERCHRYSLER CORPORATION