LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (On-Vehicle Service - Coupe) >> Transaxle Control >> Removal And Installation >> Installation Service Points >> >> A << Gearshift Link Clip Installation

>> A << Gearshift Link Clip Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Insert thoroughly the gearshift link clip, shift cable and select cable until they click in place.
  1. After installing the new gearshift link clip to the cable bracket of the transaxle, install the shift cable and select cable to the cable bracket.
    NOTE: The clip is reversible.
  2. Move the shift lever to all positions and check that the operation is smooth.
    Fig 1: Installing Gearshift Link Clip
    G04541517Courtesy of DAIMLERCHRYSLER CORPORATION