LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (On-Vehicle Service - Coupe) >> Transaxle Assembly >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

< 2.4L ENGINE > 

CAUTION: *: Indicates parts which should be temporarily tightened, and then fully tightened after placing the vehicle fully on the ground and loading the full weight of the engine on the vehicle body.
Fig 1: Removing & Installing Transaxle Assembly (2.4L Engine)
G04541522Courtesy of DAIMLERCHRYSLER CORPORATION

Required Special Tools: 

< 3.0L ENGINE > 

CAUTION: *: Indicates parts which should be temporarily tightened, and then fully tightened after placing the vehicle fully on the ground and loading the full weight of the engine on the vehicle body.
Fig 2: Removing & Installing Transaxle Assembly (3.0L Engine)
G04541523Courtesy of DAIMLERCHRYSLER CORPORATION

Required Special Tools: 

scientia non olet · About LEMON Manuals