LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (On-Vehicle Service - Coupe) >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2005 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION

TOOL TOOL NUMBER AND NAME REPLACED BY MILLER TOOL NUMBER APPLICATION
G04541506
 MB991453
Engine hanger assembly		 C-4852 When the engine hanger is used: Supporting the engine assembly during removal and installation of the transaxle assembly
NOTE: Special tool MB991454 is a part of engine hanger attachment set MB991453.
G04541507
 GENERAL SERVICE TOOL MZ203827
Engine lifter		 N/A
G04541508
 MB991454
Engine hanger balancer		 C-4852
G04541509
 MB991895
Engine hanger		 N/A
G04541510
 MB991928 Engine hanger
  1. MB991929 Joint (50) x2
  2. MB991930 Joint (90) x2
  3. MB991931 Joint (140) x2
  4. MB991932 Foot (standard) x4
  5. MB991933 Foot (short) x2
  6. MB991934 Chain and hook assembly
 N/A
G04541511
 MB991897
Ball joint remover		 MB991113, N/A or general service tool Knuckle and tie rod end ball joint breakaway torque check
NOTE: Steering linkage puller (MB990635 or MB991113) is also used to disconnect knuckle and tie rod end ball joint.
scientia non olet · About LEMON Manuals