LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Steering Wheel And Shaft Assembly >> Disassembly And Assembly >> Disassembly Service Point >> << A >> Steering Lock Bracket/Steering Lock Cylinder Removal

<< A >> Steering Lock Bracket/Steering Lock Cylinder Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

If it is necessary to remove the steering lock cylinder, use a hacksaw to cut the special bolts at the steering lock bracket side.

Fig 1: Removing Steering Lock Bracket/Steering Lock Cylinder
G04539238Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals