>> A << Steering Lock Cylinder/Steering Lock Bracket/Special Bolt Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: The steering lock bracket and bolts must be replaced with new ones when the steering lock is installed.

When installing the steering lock cylinder and steering lock bracket to the column tube, temporarily install the steering lock in alignment with the column boss.
After checking that the lock works properly, tighten the special bolts until the head twists off.

Fig 1: Installing Steering Lock Cylinder/Steering Lock Bracket/Special Bolt
Courtesy of DAIMLERCHRYSLER CORPORATION