LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Hoses >> Removal And Installation >> Installation Service Points >> >> C << Pressure Hose Installation

>> C << Pressure Hose Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the pressure hose at the gear box side so that the marking is positioned as shown in the illustration.
    Fig 1: Installing Pressure Hose At Gear Box Side (2.4L Engine)
    G04539285Courtesy of DAIMLERCHRYSLER CORPORATION
    Fig 2: Installing Pressure Hose At Gear Box Side (3.0L Engine)
    G04539286Courtesy of DAIMLERCHRYSLER CORPORATION
  2. Install the pressure hose at the power steering oil pump side as shown in the illustration.
    Fig 3: Installing Pressure Hose At Power Steering Oil Pump Side
    G04539287Courtesy of DAIMLERCHRYSLER CORPORATION