LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Disassembly Service Points >> << K >> Oil Seal Removal

<< K >> Oil Seal Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Be careful not to damage the inner surface of the rack cylinder of the gear housing.

Use a piece of pipe or similar tool to remove the oil seal from the gear housing.

Fig 1: Removing Oil Seal
G04539259Courtesy of DAIMLERCHRYSLER CORPORATION