LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Disassembly Service Points >> << D >> Seal Ring Removal

<< D >> Seal Ring Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When cutting the seal ring, be careful not to damage the pinion and valve assembly or the rack.

Cut the seal ring and remove it from the pinion and valve assembly and the rack.

Fig 1: Removing Seal Ring
G04539253Courtesy of DAIMLERCHRYSLER CORPORATION