LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Steering System - Coupe) >> Power Steering Gear Box Assembly >> Disassembly And Assembly >> Lubrication And Sealing Points >> Disassembly Service Points >> << C >> Oil Seal/Pinion And Valve Assembly Removal

<< C >> Oil Seal/Pinion And Valve Assembly Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.

Using a plastic hammer, gently tap the pinion to remove it.

Fig 1: Removing Oil Seal/Pinion And Valve Assembly
G04539252Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About LEMON Manuals